Test-Drive the New Isolated High-Power Stimulator
ViroMax High-Efficiency Viral Bacterial Filter
Can operate both in stand-alone mode, and connected to PC via USB.
FlowMIR-VBMax turbine-filter kits are disposable in their entirety and allow compliance with enhanced infection control procedures.
Learn more| Size | 55 x 160 x 25 mm (2.2 x 6.3 x 1.0 in) |
| Weight | 140 g (battery pack included, 4.9 oz) |
| Turbines | |
| Battery pack | Rechargeable lithium-ion 3.7 V, 1100 mAh |
| Current Consumption | ~20-30 mA (during testing) |
| Charge Batteries | Voltage=5 V DC Current = minimum 500 mA Input current = 100VAC - 240 VAC Connector: micro USB type B compliant with EN 60601-1 |
| Autonomy | 50 hours |
| Connectivity | USB 2.0 |
| Display | monochrome LCD, 160 x 80 pixels |
| Keyboard | 6-key membrane |
| Mouthpiece | Ø 30 mm (1.18 in) |
| Type of electrical protection | Powered internally |
| Safety level due to shock hazard | Type BF device |
| IP protection level | IPX1 |
| Terms of use | Device for continuous use |
| Storage conditions | Temp: MIN -20°C, MAX+60°C Humidity: MIN 10% RH; MAX 95%RH |
| Operating conditions | Temp: MIN +10°C, MAX +40°C Humidity: MIN 10% RH, MAX 95%RH |
| Sensor | two-way digital turbine |
| Flow range | ±16L/s |
| Volume accuracy | ±2.5% or 50mL |
| Flow accuracy | ±5% or 200 mL/s |
| Dynamic resistance | <0.5 cm H2O/L/s |
| Temperature sensor | semiconductor (0-45°C) |
| Available tests | FVC, VC, IVC, POST |
| Measured parameters (Stand-alone mode) |
*FVC, *FEV1, *PEF, FVC, FEV1, FEV1/FVC, PEF, FEF25-75, FET, BEV,VC, IVC, IC, ERV, ELA *Best values |
| Measured parameters (via MIR Spiro software) | FVC, FEV1, FEV1%, PEF, FEF25–75, FET, VC, IVC, IC, Extr. Vol, ELA ERV,MVV |
| Memory capacity | more than 10,000 tests |
